Cette page n'est pas disponible dans la langue souhaitée.
Strip coiler
Introduction
The strip coiler/decoiler SH 210/ SH 220/ SH 230 satisfies all the functions and requirements of a demanding strip feed and take-off unit for automatic production and assembly machines.
It handles your high quality strips safe and with maximum care. Strip slack as well as strip elongation are controlled by the integrated PLC which actively communicates with your assembly system. To avoid unnecessary stress to your high quality strip, the new Komax coiler/decoiler family has a frequency controlled rampup – rampdown drive.
Your finest paper interlayer is reusable, because of the speed and torque controlled paper rewinder.
To precisely adapt your decoiler to your requirements, several options are available.
It handles your high quality strips safe and with maximum care. Strip slack as well as strip elongation are controlled by the integrated PLC which actively communicates with your assembly system. To avoid unnecessary stress to your high quality strip, the new Komax coiler/decoiler family has a frequency controlled rampup – rampdown drive.
Your finest paper interlayer is reusable, because of the speed and torque controlled paper rewinder.
To precisely adapt your decoiler to your requirements, several options are available.
Key features:
- Modular design with widely used alu slot profile and standard parts
- Stand available in two jib variants for mounting all options
- Base plate suitable for handling by fork lift truck
- Adjustable loop guidance
- Paper break monitoring
- Contactless strip interrogation with optical sensors
- Central control panel (see technical data for functions)
- Paper rewinder with adjustable paper traction and winding speed, selectable rotation direction
- control system Beckhoff
Function
Functions on the control panel
- Switch for set-up and automatic mode
- Inching key for decoiling and coiling in manual mode
- Swich for left and right hand rotation direction
- Signal lamps for On-Off and strip Ok
- LED’s for timeout, strip elongation and paper break
- Emergency-stop pushbutton
Communication signals
24 V/0.5 A max.
- Coiler/decoiler ready
- strip elongated
- no strip
- paper break
Technical Data
| Max. coil weight each coil (higher weight on request) |
80kg |
|---|---|
| Coil outside ø | 250–1000mm |
| Coil inside ø (with clamping lever tensioner) |
20–140mm |
| Coil inside ø (with quick-action tensioner) |
300–600mm |
| Coil carrier- ø | 200–720mm |
| Strip width | 20–120mm |
| Coiling/decoiling speed | 0–9.6rpm |
| Voltage supply | 230V, 50Hz |
| Wattage | 80W |
| Mains supply cable (end open) | 3m |
| Paint finish No. paper rewinder | RAL 7035 light grey |
| Paint finish No. control cabinet | RAL 7035 light grey |
| Paint finish No. base plate | according to project |
Pour de plus amples informations, veuillez contacter:
Komax AG Rotkreuz, SwitzerlandThomas Henseler
phone.: +41 41 799 45 45
mailto: Thomas Henseler