Esta página não está disponível na língua selecionada.
bt 188 T - Semiautomatic twister
Introduction
The new semiautomatic bt 188 T twister stands out for its top quality twisting,
ease of operation and attractive value for the money.
Key features:
- Easy to operate
- High production speed
- Excellent processing quality
- Quality prompts prior to production release
- Calculation of process parameters based on the values of the end product
- Option for twisting of three or four conductors with no pitch errors
Function
Twisting two, three or even four wires is so easy with the bt 188 T. With the precise
multi-conductor twisting option, three or four conductors can be twisted perfectly with no pitch errors.
As with twisted pairs, the result is a uniform pitch lengt with a high reproducibility over the entire
twisted length of the cable.
The
intuitive TopTouch control system makes work much simpler. Programming a new product or loading a saved
one is easy to understand and quick and simple to do. Up to 500 different products can be saved.
The untwisted cable length is automatically calculated from the values for the end product. With this advantage, a new product can be set up with minimum use of test material and quickly made ready for the production start.
The untwisted cable length is automatically calculated from the values for the end product. With this advantage, a new product can be set up with minimum use of test material and quickly made ready for the production start.
Technical data
| Wire cross sections | 2 × 0.08 to 2 × 4 mm2 (Optional: 3 or 4 wires) |
|---|---|
| Pitch length | 8 - 50mm |
| Length open ends | Side 1: 25 – 190 mm Side 2: 25 – 85 mm |
| Difference open ends | 0-60mm |
| Twisted length | 200 – approx. 2500 mm (standard)* 200 – approx. 5500 mm (1 extension)* 200 – approx. 7000 mm (2 extensions)* 200 – max. 100000 mm (3 extensions)* * Depends on the material and the pitch length With option precise multi-conductor twisting the minimum twisted length is approx. 150mm) |
| Electrical connection | 115/230V-50/60Hz |
| Pneumatic connection | 4 - 6bar |
| Dimensions (W×H×D) | 3711 × 1275 × 900 mm ** (Extension: 3000 mm) **Dimensions with table base (optional) |
| Piece output | approx. 350 pcs/h *** approx. 250 pcs/h (optional high-precision multiple cunductor twisting) ***Conductor FLRY: 2 × 0.5 mm2, pitch: 20 mm, final length: 1000 mm,open ends both sides: 30 mm, overtwist: 25%, wire end processing: cut |
Accessories/options
- Precise multi-conductor twisting
- Extension
- Feed tray
- Table base
- Foot pedal
Services
Komax offer to you an optimal support by individual Service offers.
